Trade Names

A - B

Abrazo 400
Quenched and quenched and tempered abrasion resistant steel plate with a minimum hardness of 360 BHN produced by Corus Steel (formerly British Steel, now a subsidiary of Tata Steel). See: www.corusgroup.com.
Abrazo 500
Quenched and quenched and tempered abrasion resistant steel plate with a minimum hardness of 450 BHN produced by Corus Steel (formerly British Steel, now a subsidiary of Tata Steel). See: www.corusgroup.com.
Algoma 100
Quenched and tempered structural steel plate with a minimum yield strength of 100 ksi (690 MPa) produced by Essar Steel Algoma Inc. See: www.essarsteelalgoma.com.
Algoma 130
Quenched and tempered structural steel plate with a minimum yield strength of 130 ksi (890 MPa) produced by Essar Steel Algoma Inc. See: www.essarsteelalgoma.com.
AlgoTuf 400F
Quenched and quenched and tempered abrasion resistant steel plate having a hardness range of 360-440 BHN produced by Essar Steel Algoma Inc. See: www.essarsteelalgoma.com.
AlgoTuf 450F
Quenched and quenched and tempered abrasion resistant steel plate having a hardness range of 410-477 BHN produced by Essar Steel Algoma Inc. See: www.essarsteelalgoma.com.
AlgoTuf 500
Quenched and quenched and tempered abrasion resistant steel plate having a hardness range of 477-545 BHN produced by Essar Steel Algoma Inc. See: www.essarsteelalgoma.com.
Armox 500T
Quenched and tempered ballistic resistant steel plate having a hardness range of 480-540 BHN produced by SSAB. Armox is a registered trademark of SSAB Oxelosund AB. See: www.ssab.com.
Astralloy-V
Air hardened, work hardening steel plate with a hardness range of 418-512 BHN produced by Astralloy Steel Products Inc., part of Arcelor Mittal. See: www.astralloy.com.
BethStar
As rolled low carbon steel with improved forming and notch toughness in 50, 60, 70, 80 ksi produced by Arcelor Mittal. See: www.arcelormittal.com.
Bisplate 320
Quenched and tempered abrasion resistant steel plate with a hardness range of 320-360 BHN produced by Bisalloy Steels Group Ltd. See: www.bisalloy.com.au.
Bisplate 400
Quenched and tempered abrasion resistant steel plate with a hardness range of 370-430 BHN produced by Bisalloy Steels Group Ltd. See: www.bisalloy.com.au.
Bisplate 450
Quenched and tempered abrasion resistant steel plate with a hardness range of 425-475 BHN produced by Bisalloy Steels Group Ltd. See: www.bisalloy.com.au.
Bisplate 500
Quenched and tempered abrasion resistant steel plate with a hardness range of 477-534 BHN produced by Bisalloy Steels Group Ltd. See: www.bisalloy.com.au.
Bisplate 80
Quenched and tempered steel plate having a minimum yield strength of 100 ksi (690 MPa) produced by Bisalloy Steels Group Ltd. See: www.bisalloy.com.au.

C - F

CHT 360
Quenched and quenched and tempered abrasion resistant steel plate having a hardness range of 341-388 BHN formerly produced by CHT Steel Company, now defunct. Our HS 400 grade can be an appropriate substitute for CHT 360.
CHT 425
Quenched and quenched and tempered abrasion resistant steel plate having a hardness range of 388-415 BHN formerly produced by CHT Steel Company, now defunct. Our HS 400 grade can be an appropriate substitute for CHT 425.
CHT 475
Quenched and quenched and tempered abrasion resistant steel plate having a hardness range of 450-495 BHN formerly produced by CHT Steel Company, now defunct. Our HS 450 grade can be an appropriate substitute for CHT 475.
Cor-Ten
Corrosion resistant steel available in three types: A (compare ASTM A242 and CSA G40.21 50A); B (compare ASTM A588); and C (compare ASTM A871) produced by United States Steel Corporation. Cor-Ten is a registered trademark of United States Steel Corporation. See: www.ussteel.com.
Creusabro 4800
Heat treated, microcarbide (Cr-Mo), work hardening steel plate with a hardness range of 340-400 BHN produced by Industeel, part of Arcelor Mittal. See: www.industeel.info.
Creusabro 8000
Heat treated, oil quenched, microcarbide (Cr-Mo), work hardening steel plate with a hardness range of 430-500 BHN produced by Industeel, part of Arcelor Mittal. See: www.industeel.info.
DILLIDUR 400 V
Quenched and quenched and tempered abrasion resistant steel plate having a hardness range of 370-430 BHN produced by Dillinger Hutte GTS. See: www.dillinger.de.
DILLIDUR 450 V
Quenched and quenched and tempered abrasion resistant steel plate having a hardness range of 420-480 BHN produced by Dillinger Hutte GTS. See: www.dillinger.de.
DILLIDUR 500 V
Quenched and quenched and tempered abrasion resistant steel plate having a hardness range of 470-530 BHN in thicknesses less than or equal to 30mm, produced by Dillinger Hutte GTS. See: www.dillinger.de.
DILLIMAX 690
Quenched and tempered steel plate having a yield strength of 100 ksi (690 MPa) in thicknesses less than or equal to 65mm, produced by Dillinger Hutte GTS. See: www.dillinger.de.
Domex 700 MC
As rolled high strength structural sheet steel with improved formability having a yield strength of 100 ksi (700 MPa) produced by SSAB. Domex is a registered trademark of SSAB Tunnplat AB. See: www.ssab.com.
EB-450
Quenched and tempered abrasion resistant steel plate with a hardness range of 418-495 BHN produced by Astralloy Steel Products Inc., part of Arcelor Mittal. See: www.astralloy.com.
FORA 360
Quenched abrasion resistant steel plate with a hardness range of 320-400 BHN produced by Industeel, part of Arcelor Mittal. See: www.industeel.info.
FORA 400
Quenched abrasion resistant steel plate with a hardness range of 360-440 BHN produced by Industeel, part of Arcelor Mittal. See: www.industeel.info.
FORA 450
Quenched abrasion resistant steel plate with a hardness range of 410-490 BHN produced by Industeel, part of Arcelor Mittal. See: www.industeel.info.
FORA 500
Quenched abrasion resistant steel plate with a hardness range of 460-540 BHN produced by Industeel, part of Arcelor Mittal. See: www.industeel.info.
Formalloy 400
Abrasion resistant steel plate produced by Evraz Oregon Steel Inc. See: www.evrazincna.com.
Formalloy 500
Abrasion resistant steel plate produced by Evraz Oregon Steel Inc. See: www.evrazincna.com.

G - P

HARDOX 400
Quenched abrasion resistant steel plate having a hardness range of 370-430 BHN produced by SSAB. Hardox is a registered trademark of SSAB Oxelosund AB. See: www.ssab.com or www.hardox.com.
HARDOX 450
Quenched abrasion resistant steel plate having a hardness range of 425-475 BHN produced by SSAB. Hardox is a registered trademark of SSAB Oxelosund AB. See: www.ssab.com or www.hardox.com.
HARDOX 500
Quenched abrasion resistant steel plate having a hardness range of 470-530 BHN in thicknesses equal or less than 32mm, produced by SSAB. Hardox is a registered trademark of SSAB Oxelosund AB. See: www.ssab.com or www.hardox.com.
HARDOX 550
Quenched abrasion resistant steel plate having a hardness range of 525-575 BHN produced by SSAB. Hardox is a registered trademark of SSAB Oxelosund AB. See: www.ssab.com or www.hardox.com.
HARDOX 600
Quenched abrasion resistant steel plate having a hardness range of 570-640 BHN produced by SSAB. Hardox is a registered trademark of SSAB Oxelosund AB. See: www.ssab.com or www.hardox.com.
HARDOX Extreme
Quenched abrasion resistant steel plate having a hardness range of 650-700 BHN produced by SSAB. Hardox is a registered trademark of SSAB Oxelosund AB. See: www.ssab.com or www.hardox.com.
HARDOX HiTuf
Quenched abrasion resistant steel plate with enhanced impact properties having a hardness range of 310-370 BHN produced by SSAB. Hardox is a registered trademark of SSAB Oxelosund AB. See: www.ssab.com or www.hardox.com.
HARDWEAR 400F
Quenched and quenched and tempered abrasion resistant steel plate having a hardness range of 360-444 BHN produced by Arcelor Mittal. See: www.arcelormittal.com.
HARDWEAR 450F
Quenched and quenched and tempered abrasion resistant steel plate having a hardness range of 429-495 BHN produced by Arcelor Mittal. See: www.arcelormittal.com.
HARDWEAR 500F
Quenched and quenched and tempered abrasion resistant steel plate having a hardness range of 460-544 BHN produced by Arcelor Mittal. See: www.arcelormittal.com.
JFE-EH-SP
Quenched and quenched and tempered abrasion resistant steel plate (“JFE EverHard”) with titanium carbide precipitates having a minimum hardness of 401 BHN produced by JFE Steel Corporation. Website: www.jfe-steel.co.jp.
JFE-EH360
Quenched and quenched and tempered abrasion resistant steel plate (“JFE EverHard”) having a minimum hardness of 361 BHN produced by JFE Steel Corporation. Also available as JFE-EH360A (same hardness with impact properties) and JFE-EH360LE (hardness range of 361-440 BHN with enhanced impact properties). Website: www.jfe-steel.co.jp.
JFE-EH400
Quenched and quenched and tempered abrasion resistant steel plate (“JFE EverHard”) having a minimum hardness of 401 BHN produced by JFE Steel Corporation. Website: www.jfe-steel.co.jp.
JFE-EH500
Quenched and quenched and tempered abrasion resistant steel plate (“JFE EverHard”) having a minimum hardness of 477 BHN produced by JFE Steel Corporation. Also available as JFE-EH500A (same hardness with impact properties) and JFE-EH500LE (hardness range of 477-556 BHN with enhanced impact properties). Website: www.jfe-steel.co.jp.
JFE-HITEN780LE
Microalloyed and thermomechanically controlled processed (TMCP) steel plate having a minimum yield strength of 99 ksi (685 MPa) produced by JFE Steel Corporation. Also available as JFE-HITEN 780M (quenched and tempered). Website: www.jfe-steel.co.jp.
N-A-XTRA M700
Quenched and tempered steel plate with a minimum yield strength of 100 ksi (700 MPa) produced by ThyssenKrupp Steel Europe. See: ThyssenKrupp Steel Europe.
Optim 700 MC Plus
Thermomechanically controlled rolled steel plate and sheet with a minimum yield strength of 100 ksi (700 MPa) produced by Rautaruukki Corporation. See: www.ruukki.com.
Optim 700 QL
Quenched and tempered steel plate with a minimum yield strength of 100 ksi (690 MPa) produced by Rautaruukki Corporation. See: www.ruukki.com.
PAS 700
As rolled high strength structural steel sheet with improved formability having a yield strength of 100 ksi (700 MPa) produced by ThyssenKrupp Steel Europe. See: ThyssenKrupp Steel Europe.

R - V

RAEX 400
Hardened (thermomechanically controlled rolled, quenched, quenched and tempered) steel plate and sheet with a hardenss of 360-450 BHN produced by Rautaruukki Corporation. See: www.ruukki.com.
RAEX 450
Hardened (thermomechanically controlled rolled, quenched, quenched and tempered) steel plate and sheet with a hardenss of 420-500 BHN produced by Rautaruukki Corporation. See: www.ruukki.com.
RAEX 500
Hardened (thermomechanically controlled rolled, quenched, quenched and tempered) steel plate and sheet with a hardenss of 450-540 BHN produced by Rautaruukki Corporation. See: www.ruukki.com.
ROC 400
Quenched and tempered abrasion resistant steel plate with a hardness range of 364-444 BHN produced by Astralloy Steel Products Inc., part of Arcelor Mittal. See: www.astralloy.com.
ROC 500
Quenched and tempered abrasion resistant steel plate with a hardness range of 444-555 BHN produced by Astralloy Steel Products Inc., part of Arcelor Mittal. See: www.astralloy.com.
RQT 701
Quenched and tempered steel plate having a minimum yield strength of 100 ksi (690 MPa) produced by Corus Steel (formerly British Steel, now a subsidiary of Tata Steel). See: www.corusgroup.com.
RQT 901
Quenched and tempered steel plate having a minimum yield strength of 130 ksi (890 MPa) produced by Corus Steel (formerly British Steel, now a subsidiary of Tata Steel). See: www.corusgroup.com.
SB-50
SB-50 is Hardbor 500.  SB-50 was the original marketing name for quenched Swedish boron steel, which is now known in North America under its registered trademark Hardbor 500.
Scandia
Former trade name for all quenched and tempered steel plate produced by SSAB. Now changed to WELDOX and HARDOX, weldable and hard steel from SSAB Oxelosund AB. See www.ssab.com.
SECURE 200
Thermomechanically rolled high strength armour steel with a minimum hardness of 200 BHN and minimum tensile strength of 100 ksi (690 MPa) produced by ThyssenKrupp Steel Europe. See: ThyssenKrupp Steel Europe.
SECURE 500
Quenched and tempered armour steel with defined properties of ballistic protection and a hardness of 480-530 BHN produced by ThyssenKrupp Steel Europe. See: ThyssenKrupp Steel Europe.
Superelso 690CR
Quenched and tempered steel plate having a minimum yield strength of 100 ksi (690 MPa) with enhanced impact properties produced by Industeel, part of Arcelor Mittal. Superelso is a registered trademark of Industeel. See: www.industeel.info.
Supralsim 690
Quenched and tempered steel plate having a minimum yield strength of 100 ksi (690 MPa) produced by Industeel, part of Arcelor Mittal. Superalsim is a registered trademark of Industeel. See: www.industeel.info.
Swebor 500
Quenched steel sheet with a hardness of 450-550 BHN produced by Swebor Stal Svenska AB. See: www.swebor.se.
USS AR 225
As rolled steel plate with a hardness range of 200-250 BHN produced by United States Steel Corporation. See: www.ussteel.com.
USS Con-Pac 100
Quenched and tempered structural steel with a typical yield strength of 100 ksi (690 MPa) produced by United States Steel Corporation. Con-Pac is a registered trademark of United States Steel Corporation. See: www.ussteel.com.
USS Shield 400
Quenched and quenched and tempered abrasion resistant steel having a hardness range of 360- 444 BHN produced by United States Steel Corporation. Shield is a registered trademark of United States Steel Corporation. See: www.ussteel.com.
USS T-1 100
Quenched and tempered structural steel with a typical yield strength of 100 ksi (690 MPa) produced by United States Steel Corporation. T-1 is a registered trademark of United States Steel Corporation. See: www.ussteel.com.
USS T-1 Abrasion
Quenched and tempered abrasion resistant steel plate having a hardness range of 320-360 BHN. T-1 is a registered trademark of United States Steel Corporation. See: www.ussteel.com.

W - Z

Wearalloy 400
Quenched and tempered abrasion resistant steel plate with a hardness range of 388-430 BHN produced by Ford Steel Company. See: www.fordsteel.com.
Wearalloy 450
Quenched and tempered abrasion resistant steel plate with a hardness range of 444-475 BHN produced by Ford Steel Company. See: www.fordsteel.com.
Wearalloy 500
Quenched and tempered abrasion resistant steel plate with a hardness range of 477-544 BHN produced by Ford Steel Company. See: www.fordsteel.com.
WELDOX 700
Quenched and tempered steel plate having a minimum yield strength of 100 ksi (700 MPa) produced by SSAB. WELDOX is a registered trademark of SSAB Oxelosund AB. Website: www.ssabox.com or www.weldox.com.
WELDOX 900
Quenched and tempered steel plate having a minimum yield strength of 130 ksi (900 MPa) produced by SSAB. WELDOX is a registered trademark of SSAB Oxelosund AB. Website: www.ssabox.com or www.weldox.com.
XABO 890
Quenched and tempered steel plate with a minimum yield strength of 130 ksi (890 MPa) produced by ThyssenKrupp Steel Europe. See: ThyssenKrupp Steel Europe.
XAR 300
Quenched and quenched and tempered abrasion resistant steel plate having a hardness range of 270-340 BHN produced by ThyssenKrupp Steel Europe. See: ThyssenKrupp Steel Europe.
XAR 400
Quenched and quenched and tempered abrasion resistant steel plate having a hardness range of 370-440 BHN produced by ThyssenKrupp Steel Europe. See: ThyssenKrupp Steel Europe.
XAR 450
Quenched and quenched and tempered abrasion resistant steel plate having a hardness range of 425-477 BHN produced by ThyssenKrupp Steel Europe. See: ThyssenKrupp Steel Europe.
XAR 500
Quenched and quenched and tempered abrasion resistant steel plate having a hardness range of 460-530 BHN produced by ThyssenKrupp Steel Europe. See: ThyssenKrupp Steel Europe.
XAR 600
Quenched and quenched and tempered abrasion resistant steel plate having a hardness range of 560-640 BHN produced by ThyssenKrupp Steel Europe. See: ThyssenKrupp Steel Europe.
XF100 (100XF)
As rolled high strength structural steel having a minimum yield strength of 100 ksi (690 MPa) produced by SSAB. See: www.ssab.com.
Copyright © 2014 High Strength Plates & Profiles Inc. Legal Notice   Accessibility Policy Site designed & maintained by Graphiti Designs.